Prerequisites:
In order to install AccessBee the following prerequisites must
be met.
Windows
'95, Windows '98, or Windows NT 4.0 installed and running.
A
functional modem (preferably 14.4 or faster)
A
Windows 95, Windows 98, or Windows NT installation CD.
A
working phone line.
Installing
Dial-up Networking
Check
the My Computer icon for the presence of the Dial-up
Networking Folder. If it is present proceed to Step 2.
From
the My Computer icon choose the Control Panel.
Choose
the Add/Remove Programs folder then choose the Windows
Setup Tab.
Highlight
the Communications Option and choose the Details
button
Place
a check in the Dial-Up Networking check box and choose
the OK Button.
The
installation of Dial-up Networking may prompt you for your original
Windows 95 CD. After Dial-up Networking has been installed the
system will prompt you to reboot your machine.
When
the system is rebooted the dial-up networking is ready for use.
Installing
TCP/IP as the networking protocol.
From
the My Computer icon choose the Control Panel.
Choose
the Network icon.
The
Network configuration screen will appear
Configure
Dial up networking to appear as below. The default settings for
TCP/IP will work and no further configuration is necessary.
Create
and configure your dial-up session to Access Bee.
From the desktop, double-click the My Computer Icon.
Choose the Dial-up Networking Icon, Choose the Make New connection
Icon
Re-name
the connection Access Bee.
Make sure your Modem is specified correctly.
Click
Next
Fill
in the area code and telephone number fields.
Click
Next, then click Finish.
You
now have a new connection labeled AccessBee
Right click with your right mouse button on the AccessBee connection
and select Properties.
Make
sure the telephone number field reads 282-0149 or the local access
number for your area, and the connect using box displays the correct
modem that you will be using.
Click
the Server Types Tab at the top of the window.
Make
sure you have Enabled software compression and TCP/IP checked only,
then click OK.
Go
to my computer.
and
open the control panel.
From
the control panel open the Internet Icon.
Click
the connection tab at the top of the window.
Highlight
the Access Bee connection and select "Set Default".
Make sure you have selected "Always dial my default connection".
Click on the settings tab.
Type
in your user name and password then click OK.
Close
all windows and double click your Browser.
